BKWZD - 88-6 S/G LATEX WHITE & PASTEL

  • MSDS: BKWZD
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: 88-6 S/G LATEX WHITE & PASTEL
  • National Stock Number: 8010-00F018029
Product Identification

Product ID:88-6 S/G LATEX WHITE & PASTEL
MSDS Date:01/30/1986
FSC:8010
NIIN:00F018029
MSDS Number: BKWZD

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DRIVE
PITTSBURGH, PA 15238

Emergency Phone: (304) 843-1300

Info Phone: (415) 963-5822

Cage: 93915

Contractor
PPG INDUSTRIES INC CHEMICAL DIVISION
PITTSBURGH, PA 15222-1416 US

Telephone: 304-843-1300

Cage: 93915

Ingredients

PROPANOIC ACID, 2-METHYL, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1%


WATER, H2O

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 25%


FILM FORMERS

Fraction By Weight: <20%


RESIN

Fraction By Weight: <20%


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 5%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


HIGH BOILING ALIPHATIC SOLVENT

Fraction By Weight: <1%


2-AMINO-2-METHYL-1-PROPANOL

CAS: 124-68-5

RTECS: UA5950000

Fraction By Weight: <1%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, REDNESS, ITCHING,
BURNING SENSATION, VISUAL DISTURBANCES. SKIN: IRRITATION, DRYNESS,
ITCHING, CRACKING, BURNING, REDNESS & SWELLING. INHALATION:
HARMFUL, NOSE & THROAT IRRITATION. IN GESTION: HARMFUL, FATAL,
KIDNEY & LIVERDAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION, REDNESS, ITCHING, BURNING
SENSATION & VISUAL DISTURBANCES. SKIN: IRRITATION, DRYNESS,
ITCHING, CRACKING, BURNING, REDNESS & SWELLING. INHALATION: NOSE &
THROAT IRRITATION, HARMFUL. I NGESTION: HARMFUL, FATAL, KIDNEY &
LIVER DAMAGE.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MIN. SKIN: FLUSH
W/PLENTY OF WATER, THEN WASH W/SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. APPLY ARTIFICIAL RESPIRATION & OTHER SUPPORTIVE MEASURES
AS REQUIRED . INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:299F
Extinguishing Media:CO2, DRY CHEMICAL, UNIVERAL AQUEOUS FILM FORMING
FOAM, OR OTHER NFPA CLASS B EXTINGUISHER DESIGNED FOR CLASS IIIB
FIRES.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. IF WATER IS
USED, FOG NOZZLES ARE PREFERABLE. FULL PROTECTIVE CLOTHING & SCBA.
USE WATER TO KEEP FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:CLOSE CONTAINERS MAY EXPLODE OR BURST DUE
TO THE BUILD-UP OF STEAM PRESSURE WHEN EXPOSED TO EXTREME HEAT

Accidental Release

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. WEAR PROPER
PROTECTIVE EQUIPMENT. REMOVE ALL SOURCES OF IGNITION. TAKE UP
SPILLED MATERIAL W/SAWDUST, VERMICULITE OR OTHER ABSORBENT MATERIAL
& PLACE INTO CONTAINERS FOR D ISPOSAL.

Handling

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS 111B COMBUSTIBLE LIQUIDS.
Other Precautions:PROTECT FROM FREEZING. USE VENTILATION TO REMOVE
DECOMPOSITION PRODUCTS DURING WELDING & FLAME CUTTING ON SURFACES
COATED W/THIS PRODUCT

Exposure Controls

Respiratory Protection:USE SUITABLE RESPIRATOR
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST TO KEEP Protective Gloves:GAUNLET-TYPE/LATEX RUBBER/NEOPRENE
Eye Protection:CHEMICAL-TYPE SPLASH GOGGLES
Other Protective Equipment:NITRILE GLOVES, IMPERMEABLE APRON &
PROTECTIVE CLOTHING
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING OR
SHOES.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:212-523.4F
Vapor Pres:16.9
Vapor Density:>AIR
Evaporation Rate & Reference:(BU-AC = 100): 31
Solubility in Water:45.1%
Appearance and Odor:LIQUID
Percent Volatiles by Volume:56.80%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT, FREEZING & TEMPERATURES
>120F.
Hazardous Decomposition Products:CO & OTHER HAZARDOUS DECOMPOSITION

Disposal

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED
OF THROUGH AN APPROVED WASTE MANAGEMENT FACILTY ACCORDING TO
FEDERAL, STATE & LOCAL REGULATIONS. COMBUSTIBLE LIQUID.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.